Text Box: HAMMERSURF The northwest’s custom surfboard Text Box: MODEL : HAMMER GUN SHAPE & DESIGN: Gary Swanson LENGTH ………. 7’6” - 10’ WIDTH…………. 19” - 21” NOSE…………… 10 3/4” - 11 1/2” TAIL……………. 11 3/4” - 12 1/2” THICKNESS…….. 2 3/4” - 3 1/4” TAIL OUTLINE…. Pin Tail GLASSING: TOP: 2 x 6 oz. (Deck patch and double leash plug is standard. Blank includes 1/4” or 3/8” stringer) BOTTOM: Single 6 oz. ( custom glass available on custom orders) FIN BOXES: Single Bahne box or single Bahne w/ 2 Future Systems side boxes FINS: Single Future Systems 9” glass fin or Future Systems 8” glass fin w/ side Futures SB 350 FINISH: Sanded or Gloss & Polish Text Box: DESCRIPTION: The Hammer Gun is a specialized surfboard for large surf. The board is designed with good float mid point forward to paddle well and catch waves easily. The Hammer Gun’s outline is from a classic mid 70’s Brewer template. The bottom shape is a traditional flat forward and mid to ‘V’ in the tail. Rail shape is fairly soft forward to down hard in the tail. The main themes with a large wave surfboard is first to catch the wave, second to hold to the wave face, and third to be able to roll the board on to the rail and set an edge off the bottom. The Hammer Gun incorporates all these themes in a clean, classic shape. All Hammersurf surfboards are made with only the highest quality resin, fiberglass, and foam available. All boards are handmade in the Pacific Northwest USA by Cascade Performance Fiberglass, building fine surfboards since 1972. WWW.HAMMERSURF.COM (541 478-3441)